The separator should be able to maintain a good separation effect, it is necessary to control its level and pressure. The pressure control technology is used in the control of the liquid level of the traditional separator. In the variable pressure liquid level control of separator, the float liquid level controller is used to drive oil and gas regulating valve, make the joint action, control the liquid quantity of crude oil and natural gas, adjust the liquid level in the separator, and do not control the pressure of the separator. The variable pressure liquid surface control method can minimize the throttle of oil and gas outlet valve, reduce the pressure of separator and improve the separation effect.
Oil-gas separator and three-phase separator are widely used in oil field transfer stations and joint stations. It is necessary to control the liquid level and pressure of the separator to keep good separation effect.
Related Industry Knowledge
- Precautions for oil filters
- Selection principle of air filter
- What is the oil-gas two-phase separator
- Operating Procedures for separators
- Pressure Swing control of separator
- Application of variable pressure liquid surface...
- What is screw type air compressor
- Brief introduction of screw type air compressor
- The advantages of screw compressor
- Fault detection of screw air compressor
- Why is the atlas air compressor expensive
- Air compressor troubleshooting