Compair Oil Separator Replacement
Detalis ： Working time ≤4000H Initial pressure difference<0.02MPa Residual oil amount<3PPM ※REMARK : We can provide the replacement part of famous brands . Reasons for high fuel consumption of screw air compressor: 1. The design of the air oil separator tank is unreasonable: The design of...
Reasons for high fuel consumption of screw air compressor:
1. The design of the air oil separator tank is unreasonable: The design of the primary separation system is unreasonable, therefore the oil mist concentration is very high, and the oil separator is too heavy and the separation effect is poor, resulting high fuel consumption.
2. Too much lubricating oil : More oil than normal oil level, so that part of the oil will be carried away with the compressor air, resulting high fuel oil consumption.
3. Large amount of gas, overload and low pressure: The discharge pressure is not up to the rated working pressure of the air compressor when using the air compressor.
4. Return tubing congestion: The lubricating oil that accumulates to the bottom of the oil separator can ‘t be returned to the machine head when the return tubing is blocked by a foreign matter, so that the accumulates oil droplets are taken away by the compressed air after separation.
5. oil return single valve damage:After the oil return valve is damaged, when the air compressor is shut down, the oil pressure in the oil tank will return a large amount of oil to the oil separator. The internal oil in the oil separator can’t be returned to the machine head in time when the machine is running. lead to oil droplets with compressed air to run to the outside of the air compressor.
6. Improper installation of the return tubing: when the replacement, cleaning and maintenance of the air compressor, the return pipe is not inserted into the bottom of the oil separator , causing the luricating oil not to return to the machine head in time.
7. Minimum pressure valve breakdown: Pressure valve seal a leak point or the minimum pressure valve opened ahead of schedule, make the machine at the beginning of the run to establish oil tank pressure time increase,makes the state of the low pressure gas oil mist concentration is high, the oil flow rate is fast, oil separator load increase, the separation effect is poor, lead to high fuel consumption.
8. Unqualified oil is used: The screw air compressor has high temperature protection, and if the oil is not qualified, it will cause the exhaust temperature is high and the occurrence of different high fuel consumption.
Initial pressure difference<0.02MPa
Residual oil amount<3PPM
※REMARK :We can provide the replacement part of famous brands .